|
Post by z3taphi on Jan 30, 2011 13:49:06 GMT -5
Quick question about adding the proportionate detail to an OSCS Left Elbow for GM. Take a look at the attached picture. I am basing size and proportion off boba's awesome WIP progress pics. Let me know what you guys think as I am only into the trimming phases. Thanks!
|
|
|
Post by boba on Jan 30, 2011 15:31:47 GMT -5
Hi buddy I recon just a tiny bit smaller, only just a bit
|
|
|
Post by z3taphi on Jan 30, 2011 16:56:17 GMT -5
Thanks! And many more thanks for all your WIP pics! I went a tiny bit smaller, but in the end the detail wrapped to the shape of the elbow, and I can't really tell a difference. Sorry the picture is really bright.
|
|
|
Post by boba on Feb 1, 2011 8:02:50 GMT -5
LOL I have that with my pics, they are either 2 dark or bleached out hehehe That looks ok mate, I think by looking at the screen grab it should be about half and half
|
|
|
Post by RamZnation on Feb 1, 2011 21:39:07 GMT -5
One thing I have noticed is that it may need to rest higher. If you look at the screen cap, top of sits flush with the top of the Elbow piece.
|
|
|
Post by z3taphi on Feb 19, 2011 21:41:29 GMT -5
One thing I have noticed is that it may need to rest higher. If you look at the screen cap, top of sits flush with the top of the Elbow piece. I think your right Rams based on the screen cap. I am took boba's WIP pics as gospel and committed to the lower placement for now. I am not far into my build so I should be able to change it up in the end. Thanks for the feedback!
|
|
|
Post by Banzai88 on Nov 8, 2011 23:46:46 GMT -5
I'm not convinced this 'detail' exists. It looks like weathering--unfortunately it appears symmetrical. But ILM made bad choices in the films; theres a shot in AOTC in a gunship and two clones have the EXACT same weathering.
I wish there was more than this one shot for reference. Another source for confirmation is needed.
|
|
|
Post by danrodjr on Nov 9, 2011 23:15:31 GMT -5
I agree with Banzai88 on this one!!
|
|