|
Post by Toyhunter80's on Feb 18, 2012 0:10:39 GMT -5
Hey Phil, good progress.
The eyes of the helmet look too big, and as stated above the cowl should hang down all around the bottom edge of the helmet.
The chest plate is sitting too high with too much belly exposed. I had the same problem. And I have too much belly...
Chest greebles are too low on the chest plate. And you still need the ammo belt across the chest.
Thigh pockets look a bit small and are too low.
Black undersleeves are too baggy, need to be tighter and more form fitting. Biceps should sit a bit higher on the arms.
Backpack seems to be a bit odd, but passable I would think.
Boots and shins look good (usually one of the hardest parts to get right, mine still look like crap)
I hope this helps. Not trying to rip it apart, but you asked... Love the progress and your willingness to learn and listen. Keep up the good work.
Of course your Garrison's GML will be the final say on any of these points. Remember to look at the screen shots and the ROTS shot and try to match yours to those.
|
|
|
Post by trooper71 on Feb 18, 2012 2:03:12 GMT -5
Hello there, thank you for your answers. I forgot to say that the helmet is the old one... a new bucket is in progress. The greeblies on the chest were not attached, i used to trim the chestplate and so i made them of. The points are the glue. They will be new next week, cutted out of ALU. The Undersuit is to big, i know. But i didn´t find the undersuit of my TK which fits better. Sorry But now that i know the parts i´ve made are not that bad as the old ones, i´ll start to color them. New pics will come after that. Thank you for the time. You are the best !!!!! Philip
|
|
|
Post by redkraytdragon on Feb 18, 2012 19:42:32 GMT -5
Are you wearing the Snowtrooper chest plate? If so, it's incorrect and you need to replace it
|
|
|
Post by trooper71 on Feb 22, 2012 5:03:38 GMT -5
Hi there, as you can see, i can´t stop myself working on my GM Made new ellbows and a new epaulet. i used to make the epaulet (like the old ones) from the "flickr account" picture with the measurements. But this time i added 1" at each line (you told me, that it should be bigger - and i have the will to learn ). Now i´ll cut it from plastic and add the border. May i? Do you think it is the right shape now like i do? As you can see, there´s still some shapening to do on the elbows... but i won´t last till this GM is getting approved. With your help and your patience it won´t take long till this moment. Thank you !!!!! Philip
|
|
|
Post by trooper71 on Mar 4, 2012 2:38:15 GMT -5
|
|
|
Post by danrodjr on Mar 4, 2012 6:06:43 GMT -5
Its looking good, I can't seem to zoom in on the pic's to get a closer look, but you have made a big improvement on your designs.
|
|
|
Post by trooper71 on Mar 5, 2012 11:30:41 GMT -5
Hi there, here are some futher pictures of the event where i´ve been last weekend.... hope you´ll enjoy them :-) I also add the pictures with which i´ll start a new attempt to get approved. may I? is the armor good enough ? like always many thanx for your help without which my armor wouldn´t look like what it is now..... yours philip
|
|
|
Post by danrodjr on Mar 5, 2012 22:24:39 GMT -5
Wow Phillip, you have come along way, looks 100% better than where you started, good work!!!
|
|
|
Post by trooper71 on Mar 6, 2012 10:27:16 GMT -5
Hi there, here´s something which i can´t write enough: "My GM wouldn´t look like this without your fantastic help !!!! I can´t thank you enough for all your help, your writings and for all you did for me. A very big THANK YOU"Now keep your fingers crossed.... i´ll try to get it approved again !!! The result will be writen here, be sure Yours Philip
|
|
|
Post by Tango Fett on Mar 7, 2012 8:18:07 GMT -5
May the Force be with you!
|
|
|
Post by danrodjr on Mar 11, 2012 4:38:54 GMT -5
Any word on your approval?
|
|
|
Post by trooper71 on Mar 11, 2012 5:05:47 GMT -5
@dan: No !!! I´m sitting here and wait for some (hopefully good) news about my approval. And you can imagine HOW i´m sitting here ....... But you all are the first to get news about the result, be sure !!!! Best wishes Philip
|
|
|
Post by Toyhunter80's on Mar 11, 2012 20:46:04 GMT -5
@dan: No !!! I´m sitting here and wait for some (hopefully good) news about my approval. And you can imagine HOW i´m sitting here ....... But you all are the first to get news about the result, be sure !!!! Best wishes Philip I know exactly how you are sitting there. It took me two tries to get approved. Then once you are approved come the endless upgrades. I feel that I will never be "done" working on mine.
|
|
|
Post by danrodjr on Mar 12, 2012 23:44:49 GMT -5
Toyhunter is right about that!!! lol
|
|
|
Post by trooper71 on Mar 18, 2012 2:53:16 GMT -5
still no result about my approvement !!! please keep your fingers crossed for me !!!
|
|