|
Post by apollo on Aug 22, 2007 17:23:48 GMT -5
That's fine, mate. I don't want to get too off topic, but the pistol is not coming along as well as I would have liked. I've got a couple problems with attaching the barrel to the receiver that I have to work out before I actually make the barrel. I'll get it worked out though soon enough.
|
|
|
Post by admin on Aug 22, 2007 17:24:11 GMT -5
I have edited post #51 of this thread. A maker/seller was specific named by an online handle, which is an identification violation. Keep it discrete, ladies.
|
|
|
Post by youngling on Aug 22, 2007 20:20:51 GMT -5
My bad Captain.
|
|
|
Post by phyrexia on Sept 27, 2009 5:36:30 GMT -5
So, I'll expose my project about the DC-15a. In a first time I've finished the first part of the weapons (cf pic) The all is in wood, not too heavy. I 've make a hole of 30mm (0.118 inches) with a hole saw in the first part. (cf pic 2) My problem it's that I put a PVC tube of 30mm in the hole, but I think that the accurate diameter for the tube is 40mm (0.157 inches). I'm afraid which the weight of both tube is too large compared to what will support them on the handle. So my question : Am I obliged to take a tube of 40mm ? Moreover, do I have some problem to find an adhesive PVC/wood, one advised me neoprene, but the result is not conclusive ? Thank you in advance.
|
|